Before applying a topside enamel, begin the job right with Pre-Kote One-Part Primer.Pre-Kote* is VOC compliant, one-part undercoater formulated for use with Toplac, Brightside Polyurethane or any one-part topside enamel. Pre-Kote contains microspheres which help you to attain the necesary build and also improve sandability. Pre-Kote replaces Brightside Primer and 279 White Undercoater.Key FeaturesContains microspheres which give Pre-Kote a superior buildVOC compliantCan be used with any one-part topside finishImproves topcoat flowPhysical DataType: One-part polyurethane with microspheresFinish: MatteAvailable Colors: White, Gray Components: 1Curing Mechanism: Solvent release Solids by Volume: 61%Coverage: 450sq.ft/gal.VOC: 330g/lApplicationApplication Method: Brush, roller, airless or conventional sprayNumber of Coats Recommended: 1-2Wet Film Thickness/coat: 3.5 milsDry Film Thickness/coat: 2 milsApplication Temperature Min./Max. Range: 10C/50F--29C/85FThinner: Brush: 333 - Model 117945; Spray: 216 - Model 117598Drying Times* (Hours) Drying @50F @73F @95F To Touch 3 hr. 2 hr. 1 hr. To recoat 12 hr. 8 hr. 6 hr. *The above dry times are minimums. May be recoated after the minimum time shown. There is no maximum dry time before launching.More informationFor detailed application instructions see the Interlux Pre-Kote Data Sheet.